Road-facing camera (model 2) Settings Troubleshooting

Connect the camera cables

1. Use the key to unlock, press the release button on the security cover, and remove the camera’s security cover.
2. Connect cable A to the camera.
3. If you ordered an extra storage SD card, place the card into the SD slot.
4. Replace the security cover and leave the key in the lock.
5. Connect cable A to the DC power adaptor.
6. Connect the wiring harness (B) to the DC power adaptor.
7. Connect the wiring harness (B) to the connector cable (C or E) or the OBD-II passthrough depending on your vehicle type.